1. As an Engine Treatment to Motor Oils

Can be used as an additive to a variety of motor oils (10% by volume) that meet and exceed industry and engine manufacturers’ performance requirements and API Service Classification SJ/CG-4:

1.1 High performance crankcase oils for Diesel Engines in:

* Single Grade motor oils:

SAE 10W, 20W, 30W, 40W and SAE 50W, Exceeding API Service Classification: SJ, CG-4, CF-2

* Multi grade heavy duty Motor Oils:

SAE 5W-30, 10W-30, 10W-40, 15W-40, 20W-40/50, recommended for four cycle Diesel and Gasoline engines operating in both normal and severe service and subjected to wide variation in climatic conditions, exceeding major diesel engine manufacturers’ requirements: Mack EO-L PLUS ; Mack EO-L; Volvo VDS; Caterpillar; Cummins; Detroit Diesel (4-cycle); Navistar; Allison C4; Vickers Pump Test.

Manufacturers’ performance requirements: Chrysler MS 6395-G; Ford ESE-M2C 153-E; General Motors GM 6094-M.

Used in:

• Farm machinery

• Construction Equipment

• Other off-highway applications.

• Heavy Duty Diesel Trucks

• Light Diesel Trucks.

• Diesel/ Gasoline passenger cars.

• Pumps.

• Diesel Electrical Generators.

• Diesel Marine Engines (such as Sulzer, Baldwin and ALCO).

• Mining Equipment.

• Two-cycle engines.

• Torque Converters.

Direct benefits resulting from use of FUSTRON TECHNOLOGY FUS Motor oil additive:

• LONGER OIL CHANGE INTERVALS (depending on the general condition of the engine)

• LOWER FUEL AND OIL CONSUMPTION,

• KEEPS THE ENGINE PARTS CLEAN at all times. (Which contributes to much better engine performance).

• EXTENDS LIFE OF OIL FILTER.

• LOWER OPERATING TEMPERATURE AND NOISE LEVEL.

• ELIMINATES 95 – 99% OF ENGINE WEAR.

• THE ENGINE IS PROTECTED IN A WIDER RANGE OF TEMPERATURES.

• THE ENGINE IS PROTECTED FOR REASONABLY LONG TIME, IN CASE OF LOSS OF OIL, OR COOLANT.

(The above features contribute to big savings in maintenance and direct costs for Maintenance / Warranty Service providers).

2. As an FUSTRON TECHNOLOGY FUS Transmission and Torque Fluids (5-10% in volume):

2.1. Transmission Fluids.

2.1.1. Under Ford Specifications M2C33-F and M2C138-CJ

2.1.2. Automatic Transmission Fluids that meet or exceed the following requirements: General Motors DEXRON-III, Ford MERCON, Daimler-Benz, Allison C4 Fluid and Voith DIWA Transmissions, for use in passenger cars and light trucks

2.1.3. Fluids meeting Caterpillar TO-4, TO-2 or Ellison C4.

That is recommended for use in Caterpillar transmissions, final drives (SAE 50/60W viscosity grade), Allison Power shift transmissions (SAE 30W viscosity grade), torque converters (SAE 10W viscosity grade) and hydraulic systems (SAE 10W viscosity grade). All in heavy duty applications.

2.1.4. Synthetic transmission fluids recommended for use in Eathon Road ranger and Rockwell transmissions. Meets and exceeds the requirement of Rockwell 0-81 and Eaton PS-081 specifications.

2.2. Torque Fluids

2.2.1. For use in Allison Power shift transmissions.

2.2.2. Torque converters requiring Allison Type C4 fluid.

2.2.3. Heavy-duty truck and tractor automatic transmissions.

3. As an additive to Tractor hydraulic fluids.

Meeting requirements of AGCO, John Deere J20C; Ford New Holland, ESN-M2C134-D, FNHA-2-C-201, Massey Ferguson M1135, M1141, M1127, M1129A; White Farm Equipment, Q-1826; Case Corporation, JIC-143, JIC-145, MS 1206, MS 1207; Oliver Type 55; Minneapolis-Moline Fluids; Rank, Bus Automatic Transmission Fluid; Allison C4.

Direct benefits resulting from use of FUSTRON TECHNOLOGY FUS

• LONGER OIL CHANGE INTERVALS (depending on the general condition of the equipment)

• LOWER OIL CONSUMPTION,

• KEEPS THE EQUIPMENT PARTS CLEAN at all times. (This contributes to better performance).

• EXTENDED LIFE OF OIL FILTER.

• LOWER OPERATING TEMPERATURE AND NOISE LEVEL.

• ELIMINATES 95 – 99% OF EQUIPMENT WEAR.

• THE EQUIPMENT IS PROTECTED IN A WIDER RANGE OF TEMPERATURES.

• THE EQUIPMENT IS PROTECTED FOR REASONABLY LONG TIME, IN CASE OF LOSS OF LUBRICATING FLUID.

• ITS PERFORMANCE DOES NOT DETERIORATE IN SEVERE OPERATING CONDITIONS OF DUST DIRT AND MOISTURE.

4. As an FUSTRON TECHNOLOGY FUS to Paper Machine Oils (5-10% in volume)

ISO 150, 220, 320 oils. in Extreme Temperature Bearing, Circulating Oil Systems, Gear Boxes, Dryer Section Accessories, Moisture Profiler, Calendar Rolls, Crown Control Rolls, High Temperature Air Compressors, High Pressure Hydraulic Pumps.

Direct benefits resulting from use of FUSION Metal Fusion Treatment:

• LOWER OPERATING TEMPERATURE AND NOISE LEVEL.

• ELIMINATES 95 – 99% OF EQUIPMENT WEAR.

• THE EQUIPMENT IS PROTECTED IN A WIDER RANGE OF TEMPERATURES.

• ITS PERFORMANCE DOES NOT DETERIORATE IN SEVERE OPERATING CONDITIONS OF DUST DIRT AND

MOISTURE.

The above features contribute to big savings in maintenance and direct costs for Maintenance / Warranty Service providers.

5. As an additive to Industrial Oils (10% in volume):

5.1. As an FUSTRON TECHNOLOGY FUS Metal Fusion Treatment to mineral and synthetic compressor oils (ISO 32, 68, 100) for:

• Portable and stationary rotary vane and screw compressors.

• Single stage, two stage, and multistage reciprocating compressors from but not limited to Ingersoll-Rand,

Quincy, Sullair, Atlas Copco and Gardner-Denver

5.2. As an FUSTRON TECHNOLOGY FUS to Way Oils approved by Cincinnati Milacron under their p-47 (ISO 68) and P-50 (ISO 220) specifications for Way Lubricants in the lubrication of:

• Ways in many types of machine tools, e.g., lathers, planers, shapers, drilling and tapping machines including

those where the loads can be very high.

• Enclosed gears.

• Industrial plain and ant frictional bearings.

• Lubrication of chain drives.

5.3. As an FUSTRON TECHNOLOGY FUS to Chain bar Oils for:

• Chainsaws with either hand operated or automatic chain oilers to lubricate the chain, bar and sprocket.

• Chain drivers on: straddle lift lumber carriers,

• Motorcycle chains

• Lawnmowers

• Farm equipment.

5.4. As an FUSTRON TECHNOLOGY FUS to Machine Oils, ISO 22, 32, 46, 68, 100, 150, (10%) in volume) for:

• Reduction gears

• Reciprocating air compressors

• Plain and antifriction bearings

• Electric motor bearings.

• Air compressors

• High speed gears

• All the machine oils that meet the AGMA Specifications 1, 2, 3, and 4 for gear lubrication

5.5. As an additive to Knit Oils, ISO 22, 32 (5% in volume) for:

• Circular double-knit machines

• Circular single-knit

• Full-fashioned

• Tricot and all other knitting machines.

5.6. As an FUSTRON TECHNOLOGY FUS to Handy oils for lubrication of:

• Small electric motors such as used in household appliances, sewing machines.

• Office equipment

• Garden tools

• Door hinges and locks.

6. As an FUSTRON TECHNOLOGY FUS to Gear Oils (10% in volume)

6.1. Closed Gear Oils that meet API Service Classification GL-5, MIL-L-2105E and all Mack requirements as GO-G/S and GO-H/S in the following applications:

• Rear axles

• Transmissions

• Differentials.

• Spiral bevel

• Power dividers

• Oil lubricated steering axle wheel bearings.

6.2. Enclosed industrial gear boxes running at wide range of temperatures and under severe load conditions.

6.3. Open Gear Oils Grades 100 NC, 250 NC, and 800 NC used in:

• Open gears

• Wire ropes and cables

All the grades provide lubrication for mining equipment including:

• Girth and pinion gears on rod and ball mills

• Rack and pinion gears on shovel dipsticks

• Swing and pinion gears on top of the lower frame of shovels and draglines which are sometimes served with an

automatic lubrication system.

• Open Gear Oils that meet Bucyrus-Erie and P&H requirements for electric shovels and draglines.

7. As an FUSTRON TECHNOLOGY FUS to Metalworking Cutting Oils (10% in volume) in the following applications:

7.1. Metalworking fluids Grades 11D, 21D, 31A, 31C, 41B, 41E, 43B, 44A, 45A, 45B.

• Turning, threading, tapping, and broaching of tough alloy steels.

7.2. Metalworking fluids Grades 502, 503, 504, 505 used for:

• Machining of carbon steels, alloy steels, ingot iron, and wrought iron.

• Pipe threading

• Milling, shaping, planning, lathe work, drilling and pipe perforating operations.

• Broaching, gear hobbling, threading, tapping and other demanding works.

• Machining of aluminum and aluminum alloys, copper, brass, bronze, and high strength copper alloys.

Benefits in using the FUSTRON TECHNOLOGY Equipment Treatment:

• Much lower tool wear

• Much smoother surface finish.

• Prevents welding (sticking to the cutting tool) in ferrous and non-ferrous metals.